Impact crusher is widely used as secondary crusher in stone crushing plant. It is mainly used to crush many kinds of large, medium, small sized materials with compression resistance no more than 350Mpa, in the fields of highway, railway, airport and other fields that need rock with cubic shape. It can crush limestone, granite, basalt, bluestone, etc with diameters of from 100mm to 500mm. PF impact crusher is ideal choice for crushing and screening.
The medium stone from the primary crusher will be directly fed into the impact crusher. Crushed by the impact energy generated in the impact crusher. When the impact fine crusher is working, with the help of the motor, the base of the impact fine crusher rotates rapidly, and the material is crushed by the impact of the hammer in the first crushing zone, and crushed in the second fine crushing zone, and then absorbed from the output port.
The hammer on rotor is wearing parts. If the material does not well-proportioned, the hammer is easy to worn and the service life is shorter. Then how to prolong service life of impact crusher hammer? Distributor is a good tool. It could make the material neither too fast nor too slow into impact crusher. This could avoid large power impact to the rotor. Rotor with hammer will work under a uniform load. As a result, the service life of impact crusher is prolong as well.
What’s the distributor of impact crusher? Look at below picture. More details, welcome to knock at us any time.
